Planning Search

1)

Time limit The works hereby granted shall be begun before the expiration of three years from the date of this consent.
Reason - As required by Section 18 of the Planning (Listed Buildings and Conservation Areas Act) 1990, to avoid the accumulation of consents.

2)

Compliance with drawings The works forming the subject of this consent shall not be carried out except in complete accordance with the details shown on submitted plans and shall be so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building .

3)

Work to match retained fabric All new works and works of making good to the retained fabric, whether internal or external, shall be finished to match the adjacent work with regard to the methods used and to colour, material, texture, and profile.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

4)

Retention of fabric All existing fabric including existing wall and ceiling plasterwork shall be retained, unless notated otherwise on the drawings approved under this consent.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

5)

Roof Material - Natural slates The roof slopes of the building hereby permitted shall be clad in natural slates, and so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

6)

Submission of details Detailed drawings or samples of materials as appropriate, in respect of the following, shall be submitted to and approved in writing by the local planning authority before the relevant part of the work is begun, and the works shall not be carried out other than in accordance with the details so approved and shall thereafter be so maintained: (a) Details of replacement slate on the main roofslopes, including samples (b) Details of any new brickwork, including samples (c) Notwithstanding the approved drawings, full extent of re-pointing and method statement regarding means of removal of existing pointing, profile of new pointing and mortar mixture (Please note that any new pointing should have a flush profile)
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

1)

Retain Original Fabric of Building
You are reminded that the original historic fabric of the listed building should be retained unless specifically authorised for removal by the Council as part of a listed building consent. Historic fabric which must be retained would include lath and plaster ceilings and walls, floor boards, original skirting boards, dado rails, cornice, fireplaces, staircases, and any other surviving historic fabric. Where these elements are in poor condition, repair and restoration could be undertaken by competent workmen, with the minimum amount of intervention to the historic fabric. You are reminded that the installation of recessed ceiling lights and speakers in most cases will require listed building consent. Any proposals for these particular works must be first approved by the Council as part of a listed building consent before they are installed within the listed building. Use the following link to see how advice can be obtained: Planning Advice Service Advice can be sought if a problem has occurred during consented works, but it is clearly preferable to seek advice at as early a stage as possible.

2)

Hidden Features
This consent does not cover the removal or alteration of any currently hidden features of architectural or historic interest that may be revealed during the course of building works; removal or alteration of any such features may well require listed building consent. ÿ