1)
Time limit
The works hereby granted shall be begun before the expiration of three years from the date of this consent.
Reason - As required by Section 18 of the Planning (Listed Buildings and Conservation Areas Act) 1990, to avoid the accumulation of consents.
2)
Compliance with drawings
The works forming the subject of this consent shall not be carried out except in complete accordance with the details shown on submitted plans and shall be so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building .
3)
Submission of details
Detailed drawings or samples of materials as appropriate, in respect of the following, shall be submitted to and approved in writing by the local planning authority before the relevant part of the work is begun, and the works shall not be carried out other than in accordance with the details so approved and shall thereafter be so maintained:
a) Sample panel of new brick work inclusive of pointing.
b) Mortar analysis of historic pointing with proposed mortar mix for new brickwork.
c) 1:5 section and 1:10 elevation of new door inclusive of architrave
d) Plans of all new service runs
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
4)
Brick bond
The brickwork bond shall match the original bond on the building.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
5)
Pointing, re-pointing, and jointing
The mortar mix shall match the original construction mortar of the building with regard to the grading of the aggregate, finish, and colour. The mortar must be lime based (NHL as per EN459) with no cement content. The pointing profile shall match the original profile on the building.
If the original pointing no longer exists, details of the re-pointing profile should be submitted to and approved in writing by the local planning authority before any such re-pointing takes place.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
6)
Retention of fabric
All existing fabric including existing wall and ceiling plasterwork shall be retained, unless notated otherwise on the drawings approved under this consent.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
7)
Partitions
All partitions hereby granted consent shall be of lightweight construction, easily removable, and be so maintained.
Reason:- To preserve the special architectural character and heritage significance of the listed building and comply with Policy CL4 of the Local Plan 2019.