Planning Search

1)

Time limit The works hereby granted shall be begun before the expiration of three years from the date of this consent.
Reason - As required by Section 18 of the Planning (Listed Buildings and Conservation Areas Act) 1990, to avoid the accumulation of consents.

2)

Compliance with drawings The works forming the subject of this consent shall not be carried out except in complete accordance with the details shown on submitted plans ARC619-EX000, ARC619-EX001, ARC619-PL50 REV A, ARC619-PL51 and shall be so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building .

3)

Work to match retained fabric All new works and works of making good to the retained fabric, whether internal or external, shall be finished to match the adjacent work with regard to the methods used and to colour, material, texture, and profile.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

4)

Retention of fabric All existing fabric including existing wall and ceiling plasterwork shall be retained, unless notated otherwise on the drawings approved under this consent.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

5)

Pointing, re-pointing, and jointing The mortar mix shall match the original construction mortar of the building with regard to the grading of the aggregate, finish, and colour. The mortar must be lime based (NHL as per EN459) with no cement content. The pointing profile shall match the original profile on the building. If the original pointing no longer exists, details of the re-pointing profile should be submitted to and approved in writing by the local planning authority before any such re-pointing takes place.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.

1)

Retain Original Fabric of Building
You are reminded that the original historic fabric of the listed building should be retained unless specifically authorised for removal by the Council as part of a listed building consent. Historic fabric which must be retained would include lath and plaster ceilings and walls, floor boards, original skirting boards, dado rails, cornice, fireplaces, staircases, and any other surviving historic fabric. Where these elements are in poor condition, repair and restoration could be undertaken by competent workmen, with the minimum amount of intervention to the historic fabric. You are reminded that the installation of recessed ceiling lights and speakers in most cases will require listed building consent. Any proposals for these particular works must be first approved by the Council as part of a listed building consent before they are installed within the listed building. Use the following link to see how advice can be obtained: Planning Advice Service Advice can be sought if a problem has occurred during consented works, but it is clearly preferable to seek advice at as early a stage as possible.

2)

Hidden Features
This consent does not cover the removal or alteration of any currently hidden features of architectural or historic interest that may be revealed during the course of building works; removal or alteration of any such features may well require listed building consent. ÿ