1)
Time limit
The works hereby granted shall be begun before the expiration of three years from the date of this consent.
Reason - As required by Section 18 of the Planning (Listed Buildings and Conservation Areas Act) 1990, to avoid the accumulation of consents.
2)
Compliance with drawings
The works forming the subject of this consent shall not be carried out except in complete accordance with the details shown on submitted plans and shall be so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building .
3)
Work to match retained fabric
All new works and works of making good to the retained fabric, whether internal or external, shall be finished to match the adjacent work with regard to the methods used and to colour, material, texture, and profile.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
4)
Retention of fabric
All existing fabric including existing wall and ceiling plasterwork shall be retained, unless notated otherwise on the drawings approved under this consent.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
5)
Roof Material - Natural slates
The roof slopes of the building hereby permitted shall be clad in natural slates, and so maintained.
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.
6)
Submission of details
Detailed drawings or samples of materials as appropriate, in respect of the following, shall be submitted to and approved in writing by the local planning authority before the relevant part of the work is begun, and the works shall not be carried out other than in accordance with the details so approved and shall thereafter be so maintained:
(a) Details of replacement slate on the main roofslopes, including samples
(b) Details of any new brickwork, including samples
(c) Notwithstanding the approved drawings, full extent of re-pointing and method statement regarding means of removal of existing pointing, profile of new pointing and mortar mixture (Please note that any new pointing should have a flush profile)
Reason - In order to safeguard the special architectural or historic interest and heritage significance of the building and comply with policy CL4 of the Local Plan 2019.