1)
The works hereby permitted shall be begun before the expiration of five years from the date of this consent. (C201)
Reason - As required by Section 18 of the Planning (Listed Buildings and Conservation Areas Act) 1990, to avoid the accumulation of consents. (R201)
2)
The works hereby permitted shall be carried out exactly and only in accordance with the drawings, and other particulars, forming part of the Consent, and there shall be no variation therefrom without the prior written approval of the Local Planning Authority. (C205)
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
3)
All new works and works of making good to the retained fabric, whether internal or external, shall be finished to match the adjacent work with regard to the methods used and to colour, material, texture, and profile. (C206)
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
4)
Detailed drawings or samples of materials as appropriate, in respect of the following, shall be submitted to and approved in writing by the Local Planning Authority before the relevant part of the work is begun:
(a) details of glazing bar profile, with 7mm glazing. (C208)
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
5)
All floorboards shall be retained and all internal architectural details unless notated on the drawings.
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
6)
All new internal partitions shall be lightweight and reversible.
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
7)
All internal non-original doors shall be replaced with 6-panel doors except in the basement and attic, where 4-panelled doors shall be installed.
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)
8)
All nineteenth century cornices and skirtings shall be reinstated to match original profiles wherever practicable appropriate to each floor level and ceiling plaster shall only be replaced where blown or friable.
Reason - In order to safeguard the special architectural or historic interest of the building. (R205)